GLX 292 FLEX PRIMER

Τhe product GLX 292 FLEX PRIM is an acrylic micronized water-based primer with high penetration properties. It is ideal for preparing any new or already existing porous surface, such as plaster, bricks, concrete, puttied walls, etc., thus offering perfect adhesion to acrylic plaster, water paints, mortars, tile adhesives, acrylic and cementitious waterproofing spreads, etc. It is the best solution for surfaces on which water colours, lime or low-quality old paints had been applied. It makes brittle surfaces (loose plaster, cement mortar, etc.) hard and prepares them for painting, plastering, etc. It also prepares difficult surfaces, such as plaster boards, wood, etc., for glueing ceramic tiles.

It presents high penetration abilities and reduces the capillary absorption coefficient, though without blocking the pores since it lets the surface “breathe.”

• Ideal for preparing every new or old porous surface such as plaster, brick, concrete, plastered walls etc, creating an adhesion bridge for acrylic plasters, water paints, mortars, tile adhesives, acrylic and cementitious waterproofing spreads etc.
• Suitable for hardening surfaces painted with water paints or lime
• Suitable for reducing the absorbability of porous surfaces
• Suitable for preparing absorbent surfaces, such as plasterboards, woodchip board, before glueing ceramic tiles
• Suitable for preparing surfaces before the application of insulating materials (acrylic and cementitious waterproofing spreads for flat roofs and balconies, etc.)
• Suitable for hardening brittle surfaces (such as loose plaster, cement mortar, etc.)
• Suitable for protecting surfaces covered with coloured cementitious plaster against the appearance of salts

• Deep penetration
• Protects surfaces from rainwater but lets them “breathe”
• Strong adhesion
• Hardens loose surfaces
• Reduces the absorbability of porous surfaces
• Dries quickly
• Excellent covering power
• Exceptional workability
• Highly efficient

• The surface should necessarily be clean, dry, and free from dust, mould and oil before application
• Stir well the content of the container before use and apply undiluted
• After application, close the container tightly to maintain in good condition for future use. It can be stored without any problem in a tightly closed container for a long time
• In case you need a second layer, apply at least 4 hours after the first
• Make sure that during application the product is absorbed and does not just form a skin on the surfaces
• After application, remove any remains (spills)
• Touch dry after 1 hour. Fully resistant to washing after 4 weeks

In the original sealed container, in dry places and at temperatures between +5°C and +35°C for at least 12 months after production date