DECOR PU AQUA

DΕCOR PU AQUA is a transparent, matte, polyurethane, two-component, water-based varnish, specially designed for the pro-tection of microcement and other structural elements. It provides waterproofing, has excellent adhesion to the substrate and does not yellow. Its special formulation contains UV filters against UV radiation, thus protects the colors and styles of the surface. It is particularly recommended for indoor use as it is an odorless product that does not contain solvents.

• Suitable for sealing and protecting any pressed cement mortar, cementitious substrates and natural stone. It is particularly rec-ommended for the protection of DECOR cement mortar and the enhancement of its shades. It can be applied indoors and out-doors, on walls and floors subjected to light stress.

• Odorless product without solvents
• Suitable for interior and exterior use
• Polishes and protects
• Resistant to water and neutral detergents
• Resistant to UV radiation
• Water vapor permeable
• Does not peel
• Easy and quick application
• High adhesion to the substrate
• Particularly low consumption

• The surface must necessarily be clean, dry and free of dust and mould before application. The substrate must be stable and free from loose particles, dust, oil and grease. Any stagnant water must also be removed. The surface must be protected from rising damp. Additionally, the moisture content of the substrate should be less than 4% and the atmospheric humidity less than 65%. In the case of application on microcement, it is necessary to apply DECOR PRIM before applying the varnish.
• Pour the entire amount of component B into the container of component A. For better stirring it is recommended to use a drill at low speed for 2 – 3 minutes until a homogeneous mixture is obtained. Stirring should be done carefully from the bottom to the top and along the walls of the container. After mixing compo-nent A with component B, dilute the mixture with 5 – 10% v/v of pure water, for easier application and to adjust the viscosity. Allow the mixture to mature for a few minutes before use.
• For best results we recommend the application of two coats of DECOR PU AQUA. For the application use a roller but without leaving excess material. DECOR PU AQUA must penetrate well into the application surface. The second coat is applied 24 hours Product Properties Sheet Version: A 22/02/24 DECOR PU AQUA 2-COMPONENT WATER-BASED POLYURETHANE VARNISH, FOR THE PROTECTION OF MICROCEMENT ODORLESS PROTECTION AGAINST SOLAR RADIATION (UV) EXCELLENT ADHESION PACKAGING COLOR Α 900gr (plastic container) + Β 100gr (metallic container) Α 2,7kg ( plastic container ) + Β 300gr ( plastic container). Transparent matte. CONSUMPTION STORAGE ~125 gr/m2 per layer, depending on the texture and the absorption of the surface. Component A: Store in sealed packaging in a dry en-vironment at temperatures between +5 °C and +35 °C for 24 months from the date of production. Component B: Store in sealed packaging in a dry en-vironment at temperatures between +5 °C and +35 °C for 6 months from the date of production . SUBSTRATES For microcement, cementitious substrates and natural stones. RECOMMENDED STANDARD For interior and exterior applications. According to ΕΝ 1504-2. Technical Support Hotline: +30 2103633512 support@thrakon.gr Page | 2 after the application of the first one, depending on the tempera-ture conditions of application.

Component A: Store in sealed packaging in a dry en-vironment at temperatures between +5 °C and +35 °C for 24 months from the date of production. Component B: Store in sealed packaging in a dry en-vironment at temperatures between +5 °C and +35 °C for 6 months from the date of production.