STATUS WATER BASED COATING

STATUS WATER BASED COATING is a water-soluble paint for interior use. It is suitable for stairwells, storages, kitchen ceilings, bathrooms, bedrooms and surfaces that do not require washing. It is easy to apply, has excellent coverage, spreading and whiteness. It has excellent transpiration ability thus preventing theconcentration of vapor. It has low drying times and can be recoated very quickly.

• Suitable for interior application on new surfaces or surfaces already painted with water based coatings.
• Suitable for kitchen ceilings, bathrooms, bedrooms, stairwells, storages etc.

• Environmentally friendly solvent-free
• Odorless
• Does not contain ammonia.
• Excellent transpiration ability of surfaces
• Excellent coverage
• High whiteness
• Excellent workability
• Wonderful spreading
• Economic solution for professionals

• Before applying, ensure that the surface is clean, dry, robust and free from dust, mold and grease. Remove damaged, or peeling old paint.
• Where putting is required, use the STATUS 100% ACRYLIC PUTTY and after drying, sand the surface and clean the dust thoroughly. If there are large cracks, use the ready to-use white stucco STATUS ONE COVER, fill the cracks applying just one coat without sanding. On new surfaces, prime with STATUS ACRYLIC PRIMER, STATUS AQUADUR or FLEX PRIM GLX 292 before the application. In the case of fresh plaster or cement, let the surface dry thoroughly for at least one month before painting. On gypsum boards or for repainting water painted surfaces (with lime or glue) or soiled surfaces (nicotine, soot from heaters, soot, fumes, coffee, juice, graffiti, inks, markers, mildew, mould, moisture, oil etc.) prime first with STATUS AQUADUR.
• Mix well before use, dilute properly and apply 1-2 coats of paint.
• Allow at least 3-4 hours before applying the second coat.
• Close the container tightly after use to keep the paint in good condition for future use. You can store undiluted paint in a tightly sealed container for extended periods of time without affecting the quality of the product.
• Allow 30- 40 days before painting new plaster or concrete surfaces.

Store the original, sealed containers in dry environment at temperatures between +5°C and +35°C for 12 months from production date.