STATUS GYPSUM BOARD PRIMER

The Gypsum Board Primer a high quality, white, waterbased acrylic primer, for indoor use, with excellent filler capacity, suitable for plasterboard and every other interior surface such as plaster, concrete. It gives very good adhesion, smoothing in particular the unevenness on the surface of the plasterboard. It is designed to reduce the absorbency of the surface intended for painting. It effectively contributes to covering the final color and can be repainted. It is odorless, dries quickly and it is friendly for the environment and the user.

• Suitable for reduction of absorbency, especially on the surfaces of plasterboard.
• Suitable for smoothing unevenness in plasterboard and masonry surfaces made of plaster, concrete.

• Low Volatile Organic Compounds
• Odorless
• High penetration
• Available in white color and in a numerous shades through STATUS coloring system
• Fast drying
• Excellent smoothness at unevenness in plasterboards
• Excellent workability
• High performance
• Equalizes absorbency differences between construction materials.

• The surface must necessarily be clean, dry and free from dust, mold, grease before applying. Remove all frayed, or peeling old paint. Where grouting is necessary, use the STATUS 100% ACRYLIC PUTTY and after drying, rub with sandpaper and dust well. Where there are large cracks, use the ready-to-use lightweight, white putty STATUS ONE COVER, with a single pass without rubbing. Never apply to surfaces that may contain moisture. First make sure that the cause of the moisture is avoid and that the surface is completely dry.
• Stir well the contents of the container before use, dilute properly and apply.
• Then close well the container to maintain in good condition for future use. The product is stored in a tightly closed container, without any problem for a long time.
• The application of the product on absorbent or very rough surfaces should be done by spraying. In this way we ensured a deep penetration of the material everywhere, speed of application and energy saving. When applying we should make sure that the product is absorbed and not just deposited on the substrate forming a skin.
• On new plaster or concrete application must be done after 30-40 days. These times vary depending on weather conditions (relative humidity and temperature).

Store in tightly closed container for 24 months of the date of production, in a cool and dry place.