STATUS AQUADUR

STATUS AQUADUR is a transparent, waterproof, micronized acrylic water-based primer. It is odorless and friendly for the user and the environment. Its high penetration ability makes it ideal for the preparation of any new or old porous surfaces such as plaster, brick, concrete, plastered walls etc. It is also an ideal solution for surfaces coated with glue, lime or cheap old paints. Deeply impregnates the surfaces while allowing them to breathe. It is the ideal preparation before painting with emulsion or acrylic paints, acrylic paints, relief, cement-paint or insulating materials. It stabilizes the substrates it impregnates and ensures a strong base for the adhesion of topcoats, providing higher yields, improved coverage and significantly greater durability.

• Suitable for the preparation of new surfaces, such as exposed concrete, plaster, plasterboard, stucco surfaces, brick etc. Paint with acrylic or emulsion paints
• Suitable for stabilizing surfaces painted with watercolors (glue) or lime
• Suitable for the reduction of the absorbency of porous surfaces and the preparation before painting with insulating materials

• High penetration
• Strong adhesion
• Stabilizes the loose surfaces.
• Reduces the absorption of porous surfaces.
• Fast drying
• Excellent coverage
• Great workability
• High performance

• Before applying, ensure that the surface is clean, dry, robust and free from dust, mold and grease. Remove all frayed or peeling old paint.
• Mix well before use, dilute properly and apply 1 coat of paint.
• Then close the container tightly after use to keep the paint in good condition for future use. You can store the paint in a tightly sealed container for extended periods of time without affecting the quality of the product.
• If there is a need to apply a second layer, apply at least 4 hours after the first one.
• The application of the product on very rough surfaces should be done by spraying. When applying you should make sure that the product is absorbed and not just deposited on the substrate forming a skin. After application you must remove any leftovers (ponds).
• On new plaster or concrete application must be done after 30-40 days.

Store the original, sealed containers in dry environment at temperatures between +5°C and +35°C for 24 months from production date.