Technical Support +30 800 100 14 14 Mon - Fri: 9:00 - 17:00
Polyurethane based

DESMOFLEX® Top Coat

Advanced technology 2-component aliphatic polyurethane top-coat, UV-stable

DESMOFLEX® Top Coat is the third part of the most complete DESMOFLEX® PU system, that was created by the latest research discoveries of THRAKON laboratories, to offer the ultimate and long-lasting waterproofing. DESMOFLEX® PU system produces a highly hydrophobic membrane that protects, seals and provides excellent UV resistance. The exclusive new generation “DESMOFLEX®” technology gives to the surfaces high whiteness, water vapor permeability, excellent thermal resistance and excellent adhesion for years.

Hue
White
Packaging
Metal pails (A+B component) of 5 kg
Consumption
120-250gr/m² per layer
Downloads:
TDS DOWNLOAD
Polyurethane based
DESMOFLEX® Top Coat

Description

DESMOFLEX® Top Coat polyurethane, is a two component coating (Component A+B) with unaffected whiteness and gloss, suitable for the long-term protection of roofs, rooms, balconies and asphalt, EPDM or PVC membranes that have been prior sealed with DESMOFLEX® PU. It provides excellent mechanical, thermal, chemical and UV resistance as well as protection against frost and chalk.

Application Fields

  • Waterproofing of roof
  • Waterproofing of balconies, terraces and verandas
  • Waterproofing of pedestrian decks and walkways
  • Protection of polyurethane foam insulation
  • Used over the DESMOFLEX PU on surfaces, with domestic pedestrian traffic (e.g. Roofs, Terraces, Residential Walkways) that require a glossy, color-stable and nonchalking finish

Advantages

  • Increases the abrasion and wear resistance ofthe waterproofing membrane underneath.
  • UV and color stable
  • Does not show the chalking effect of aromatic polyurethane coatings
  • Gives a glossy and easy-to-clean surface
  • Resistant to water, heat
  • Maintains its mechanical properties over a temperature span of -30oC to +90oC
  • Frost resistant
  • The waterproofed surface can be walked on (domestic pedestrian traffic)

Implementation Steps

  • Careful surface preparation is essential for optimum finish and durability. The surface needs to be clean, dry and sound, free of any contamination, which may harmfully affect the adhesion of the membrane. Maximum moisture content should not exceed 5%. New concrete structures need to dry for at least 28 days. Old, loose coatings, dirt, fats, oils, organic substances and dust need to be removed by a grinding machine. Possible surface irregularities need to be smoothened. Any loose surface pieces and grinding dust need to be thoroughly removed.
  • WARNING: Do not wash surface with water! After approx. 6-12 hours (not later than 24 hours) and while the DESMOFLEX EPOXY PRIMER is still a bit tacky, apply the polyurethane coating DESMOFLEX PU.
  • Poor enough of DESMOFLEX PU onto the prepared and primed surface and lay out by roller or brush. Continue with the same way till the surface for waterproofing is fully covered.
  • After 12 hours (till 48 hours), apply another layer of DESMOFLEX PU. For bigger surfaces, apply a third layer of the product.
  • High humidity may affect the final finish. 12-24 hours after the last application layer of DESMOFLEX PU apply the DESMOFLEX TOP COAT by roller or airless spray in one or two layers.
  • Allow 5-12 hours (not more than 36 hours) to apply the second layer.
  • For best results, the temperature during application and cure should be between 5oC and 35oC. Low temperatures retard cure while high temperature speeds up curing

Storage

Pails should be stored in dry and cool rooms for up to 36 months.