DESMOFLEX® FIBER FIX

DESMOFLEX® FIBER FIX is a fiber-reinforced, polyurethane, liquid waterproofing one-component membrane with high thixotropy and elasticity. Its unique composition of elastomeric, hydrophobic polyurethane resin and inorganic chemical additives, makes it resistant to chemical and thermal attack, UV radiation, in severe weather conditions, while giving it excellent mechanical properties, so that it can easily cope with various mechanical stresses.
During its application, it creates a single, without joints and connections, elastic, waterproof, water-vapor permeable membrane which presents a perfect adhesion in all coating surfaces, such as tiles, timber, concrete, cement mortars, etc., as well as in most waterproofing surfaces. Before using it, the substrate does not need to be smoothed, while this can be done all year round, without a long wait (low temperatures/low relative humidity).

• For indoor and outdoor use. Urban, industrial and construction site use. Suitable for conventional and demanding substrates.

• Single, elastic membrane without joints and connections
• Rapid polymerization
• Application in areas with stagnant water
• Membrane without bubbles and imperfections
• Maintains its characteristics for temperatures from -40°C to 90°C
• In case of damage to the membrane, it is repaired locally with the same material without removing the already existing coating and in just a few minutes
• Simple application (one component, ready to use)
• Provides excellent adhesion to the whole surface
• Resistant to water, rain and frost
• Vapor permeable/ breathable substrate
• Excellent resistance to chemical attacks and seawater
• Resistant to ultraviolet (UV) radiation
• High tensile strength and elasticity
• Abrasion resistant
• Resistant to microorganisms
• Crack-bridging up to 2mm, even at -10°C
• The surface remains passable
• Certified as resistant to root penetration
• Over 15 years of possible repaint

• Stir the contents of the container well with a stick and slowly before use until a ho-mogeneous mixture is formed. Do not use a mechanical stirrer.
• Apply the product to the primed surface with a brush or brush until the desired area is covered. After 18-36 hours, the second hand is performed crosswise.
• While the material is still fresh and to prevent it from slipping, apply quartz sand with a maximum grain of 2 mm.
• For excellent results, cover the whole waterproofed surface with one layer of the elastic protection paint DESMOFLEX® TOP COAT. The use of DESMOFLEX® TOP COAT is recommended especially when applied dark colours exposed to the sunlight (after 12-24 hours of DESMOFLEX® FIBER FIX). In case of the surface is going to accept heavy circulation of pedestrians (e.g. stadium shuttles), apply two layers.

Store in well-sealed containers without any problems for up to 9 months in a cool and dry place (5-30°C). Must be protected from solar radiation and frost.