{"id":894,"count":26,"description":"Waterproofing for all applications: Roof waterproofing with or without slopes, basements, wet (damp) areas (bathroom, WC), potable water tanks etc. \n<br><br><strong>Rules for proper waterproofing<\/strong>\n<br>Make sure that surfaces are clean and free from loose impurities, salts, oils and other contaminants.\n<br>Remove projections and burrs, polyurethane or other soft materials.\n<br>Cut bars protruding at depth 1,5 - 2,0 cm.\n<br>Close all holes or cracks with fast setting repair mortar THRAKON WRM 520 or WRM 500 (according to the situation).\n<br>Make sure when you apply the product that the water does not run into the substrate.\n<br>Pour water on the surface until saturation and remove excess water.\n<br>The first coat should be applied with the brush. Make sure that the product covers all the gaps.\n<br>When the first coat is finished and before it dries completely, apply crosswise the second one, also by brush.\n<br>If required, the first level should be watered beforehand.\nDuring, and three hours after application of the product, the ambient temperature should not be below + 5\u00baC.\nApplication on substrates exposed to direct sunlight, very high temperatures (over + 30\u00baC) or during strong winds is not advised.\nYou may not apply in rain or frost conditions.","link":"https:\/\/thrakon.devlh.com\/en\/application_category\/waterproofing\/","name":"Waterproofing","slug":"waterproofing","taxonomy":"application_cat","parent":0,"meta":[],"acf":[],"_links":{"self":[{"href":"https:\/\/thrakon.devlh.com\/en\/wp-json\/wp\/v2\/application_cat\/894","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/thrakon.devlh.com\/en\/wp-json\/wp\/v2\/application_cat"}],"about":[{"href":"https:\/\/thrakon.devlh.com\/en\/wp-json\/wp\/v2\/taxonomies\/application_cat"}],"wp:post_type":[{"href":"https:\/\/thrakon.devlh.com\/en\/wp-json\/wp\/v2\/application?application_cat=894"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}